HOSTGROUT & TILE CLEANING |
The counter-rotating brushes of the Liberator, Freestyle and Reliant machines easily scrub the grout and dislodge dirt and grease. • HOST® Cleaner contains a balanced blend of water, detergents, wetting agents and natural ingredients that dissolve and trap the dirt and grease. |
![]() |
Try The 10 Second Grout Test. Apply Host® to a small area of grouted tile and brush. On unsealed tiles the results can be spectacular as this test from a busy Manchester student pub shows. This floor is mopped every day but that can't stop the build up of soil. Host cleans the area quickly and very effectively without the usual smearing caused by contemporary mopping methods. After the test a simple 4 step procedure is all that's required |
|
|
STEP 1 Place red grout brushes on the HOST® Machine. Caution: The red grout brushes should only be used on grout, DO NOT use on carpet. |
![]() |
STEP 2 Apply a handful of HOST® to each square yard. Don’t apply to more than 25 sq metres at a time or the HOST® may dry out before cleaning is completed. |
|
|
STEP 3 Brush with the HOST® Machine as you would on the carpet, North and South and then East and West. The more brushing you do, the better the results will be. |
|
|
STEP 4 After brushing, turn on the vacuum and vacuum the HOST® off the floor. If the Reliant is used for cleaning the grouted tile floor, use a regular wet/dry tank vacuum to remove the HOST®. The grout will be clean and virtually dry. It may appear slightly darker in colour, but it will brighten up within 15-20 minutes as any residual moisture evaporates. |
|
|
No mess, No drying time. Great for High Speed Cleaning of Car Showrooms !! |








